Weber Tools SAC koppeling Monteer set - WT2096

SAC koppeling Monteer set

SAC (Self Adjusting Clutch) clutch mounting kit, which is indispensable when replacing the self-adjusting clutch of Audi, BMW, Fiat, Renault, Opel, Mercedes Benz, and Volvo. This set allows you to properly reset, center and align the coupling during assembly. This set is suitable for both 3-hole and 4-hole alignment.

The use of this special tool is important when mounting a self-adjusting clutch. After all, a lot can go wrong when installing a SAC (Self Adjusting Clutch) clutch. If this tool is not used, it is very likely that unusual stresses in the clutch system will be released with the force balance in the clutch. As a result, the functioning of the coupling can be adversely affected, resulting in serious malfunctions or even damage to the coupling system. It is very important that the coupling is mounted voltage-free. Only by using the special SAC tool is the technician able to mount this type of coupling without voltage. The tension ratio between the diaphragm spring, the pressure group housing and the adjustment elements is therefore the most important for a flawless operation of this exceptional coupling. Car manufacturers explicitly prescribe the use of special tools for mounting an SAC coupling. An SAC clutch should never be fitted without the associated flywheel and clutch plate, otherwise the adjustment ring will twist.

Content:

• 6 sizes for the alignment: Ø14 x 20mm, Ø15 x 20mm, Ø15 x 23mm, Ø15 x 28mm, Ø15 x 34mm, Ø20 x 23mm, Ø21 x 23mm
• Flywheel mounting bushes: M6x1, M7X1, M8X1.25
• Various fitting sleeves, adapters and threaded ends.