HL 340-90 10 bar compressor With this compressor you can perform many jobs. For a hobbyist or the do-it-yourselfer, this is an excellent machine when a little more is required in terms of work. The machine is also very suitable for paint spraying and grinding. It has a powerful 3hp engine and a 2 cylinder pump with v-belt drive. The blades in the flywheel ensure that the pump is cooled. The pressure vessel has a capacity of 90 liters, and provides a fairly large air supply that can be used for a long time. Because the compressor has a large pressure vessel, the weight is 63 kilograms. This means that it is not a light compressor. Nevertheless, the compressor is quite easy to move, because it has sturdy wheels and a handle.
Due to its capacity and large pressure vessel, this powerhouse is an ideal compressor for work that requires a lot of air, but is not suitable for continuous use. The maximum duty cycle is 30% per 60 minutes (30% compression time – 70% machine downtime). But because the compressor has a large pressure vessel, you can work for quite some time before the machine starts pumping again. It is an oil lubricated compressor. In order to enjoy it for a long time, it is important to check the oil level regularly, to top up where necessary and to change the oil periodically. The working pressure can be set with the pressure reducing valve. This compressor is also equipped with two universal quick couplings, so that it is easy for you to use. You don't have to change the hoses all the time, so you don't lose time on this. You can immediately continue with the work, for example with one hose and an impact wrench you loosen the wheel nuts of your car, while you can then blow the rims clean with the other hose and a blow gun.